Create professional experimental setup diagrams online with ease This intuitive diagram maker lets you design clear, accurate diagrams for lab setups, experiments, and scientific presentations. The experimental setup consists of a laser source (ls) coupled into the sample (s) by the microscope objective (obj) and dichroic mirror (dm) This research focused on the effects of compartment window woodblock areas on backdraft time, with a video recording of the experimental phenomena. A typical region of observation is shown (top left) Inset shows a closer view of several cells stuck to the coverslip
White led light was passed through a suitable excitation filter (ex) before illuminating the sample. The width and depth of the microchannel were 200 and 79 μm The total length of microchannel was 110 mm The heights of the chaotic mixer structures were 0, 11, and 31 μm, for the nc device (without micromixers), the cm_11 device, and the cm_31 device, respectively An enlarged image shows one cycle of the chaotic mixer structures The cm_11 and cm_31 devices were equipped with 69 cycles of.
(1) optical pulses cross the fel pulse with a 10° angle at the centre of the vmi (2) optical pulses propagate collinearly with the fel pulse (see the text). Participants would start each trial with their hands resting on the start point and looking at the fixation point until one of the trays lit up The participant would pick up objl in their left hand and objr in their right hand and place them both in the specified tray
OPEN
