Like most water meters, sensus meters have a leak testing device. Additionally, leaks can result in very large water bills Your sensus iperl water meter is equipped with a digital lcd register A plus sign (+) means water is flowing through the meter If you suspect you have a leak, take the following steps Write down the meter reading
Turn off all the water fixtures and appliances On the invensys meter, the red pointer is what is referred to as the leak indicator On the sensus ice meter, the red circle with black marker line is the leak indicator In most instances, the leak indicators will move in a clockwise motion when water is being used. One full revolution is equal to ten gallons of water Leak indicators iperl a plus sign (+) within the circle below the read indicates water is being used
Sensus the black triangle in the center is the leak detector (low flow indicator). On the left side of the meter there is a tab, pulling up on the tab will allow you to access the digital reading Sensus iperl meters are capable of reading down to the 1/100th of a gallon making it easy to determine if a leak is occurring in your home Positive flow is indicated on the meter by a (+) symbol located left of “gal”. Your sensus iperltm water meter is equipped with a digital lcd register Write down the meter reading 2
Write down the reading again on the meter. Our charges are based on 100 cubic foot increments, and each 100 cubic feet equates to approximately 748 gallons There are 3 different types of meter registers on the sensus meters based on the size, all of which read in cubic feet, but each read.
OPEN
