When a tire is installed, the vehicle must be stationary for about 20 minutes before the system recalculates The following relearn process takes up to 10 minutes, driving at a minimum speed of 12 mph. Activate the tpms sensor by increasing or decreasing the tire’s air pressure for 10 seconds, then stop and listen for a single horn chirp The single horn chirp should sound within 15 seconds, confirming that the sensor identification code has been matched to this tire and wheel position. Simple to follow procedure on how to reset/relearn the tpms service maintenance indicator warning light on gmc canyon for the year 2015, 2016, 2017 and 2019. Start from the driver side front tire, place the tpms relearn tool against the tire sidewall, near the valve stem
Then press the button to activate the tpms sensor Just like the previous model, you’ll need tpms relearn tool to reset the tire pressure monitoring system in this latest gmc canyon model year. How to reset and relearn your tire pressure monitor sensors on a gm vehicle This applies to most other makes and models, but getting the system into relearn mode will be different. In this article, we’ll walk you through everything you need to know about understanding, resetting, and maintaining your gmc canyon’s tpms to keep your drive smooth and safe. This article will show you how to complete an obd relearn and a manual relearn, with videos.
There is no need to reinitialize the tpms system in order to reset the warning light There is no reset button like the one you see in vehicles with indirect tpms system which uses abs sensors to detect low tire pressure.
OPEN
