Looking to see if anyone has ideas for a power source for bed of trd off road 2025 , it did not come with power outlet Wndering the bed dimensions on new tacomas compared to old From my research it seems like the only difference is the tailgate bulge When i had the subaru baja, there was a very useful image of the bed with dimensions labeled So i decided to duplicate that idea for my newest toy Attached please find an image of the truck bed (extended cab, 6' bed) with dimensions in inches, rounded to nearest 1/4.
So, we have been getting an enormous amount of rain lately, and the bed of my tacoma is just filling with water when it isn't driven Length 60.5 or 73.7 depth 19.1 inside bed width The tailgate panel is the same but the caps are different The main differences are on the 3rd gen there is no front rail and all the sides are about 1 taller. Bed mat recommendations discussion in ' 3rd gen Bed rack options with bakflip mx4 discussion in ' 3rd gen
Then lift the other end up and onto the tailgate Grab the other end off the dolly and lift/push into the truck You'll also need an extender from the hitch to support the portion of the boat that is not sitting on the bed/tailgate Overall looks a lot easier than loading a 500lb motorcycle. The bed rail caps are just held on with a bunch of clips They are not attached to the bed or blocks mentioned above with any sort of adhesive
I think that the blocks are just there to support weight on the caps I had both of my bed rail caps off to install my diamondback tonneau cover.
OPEN
