Now your reticle will be effected depending on if it is ffp or sfp Ffp will adjust the reticle based on the magnification so that your hold over marks are correct for the magnification Sfp will not make this adjustment so your hold over marks will only be good for one magnification Most basic hunting scopes are sfp but that really. I installed a leupold delta point pro and thought i had it zeroed pretty well Then i removed it and put the mos plate back on to shoot a production match
Today i put the red dot back on and i found the sight way out o. Turrets resettable to zero vs zero stop zero vs zero stop, explains it self In example, you set your zero on your turret You can still crank your turret down past your zero and some tend to get lost A zero stop was the answer to that problem. But if you have an ai platform and it’s a quick change you will love the tooless rezero
The dot is adjusted and zeroed with the windage and elevation screws which are mechanical adjustments All the battery does is light the diode so changing the battery will not alter the zero There are some red dot sights that have to be removed from the gun to change the battery so you want to recheck your zero after reinstalling them but the dpp allows battery change s while it is still. This may have been addressed, but if i take my 510c off the rail will i need to rezero it if i put it back on Didn't know how well they held zero if unmounted and remounted Sent from my nexus 5x using tapatalk
Posted january 23, 2012 i replaced my a2 flashhider with a surefire muzzle brake and my point of impact was raised approx 3 100 yards Good thing i listened to my brother who advised me to rezero for the reasons given on this thread. This could be a newbie question and if so i apologize But ive got a vortex viper pst mounted to a us optics 1 piece picatanny rail with burris 30mm rings If i were to remove the scope by loosing the rings hold on the rail, then re install it again Will the scope still be in zero
Do any of you guys just leave them on all the time? Have a holosun 510c on the way.just wondering if the stock height is good to go, or should i order the riser they make to bring it to a lower 3rd type height.
OPEN
