I intended to take a bunch of pictures and make sure i document my experience installing the sniper on my scrambler I probably did not get enough pictures or take enough botes, but here goes To start off, i replaced a holley 4bbl carb mounted on an offenhauser intake Is it more carb than. Just bought a 1983 scrambler and doing some restoration to it I want to get 35's on it but need to add a lift kit
I have been told that skyjacker has the best ride but also should look at old man emu Need some experienced scramblers with some advice on these lift kits with the softest ride. Ok, last week had a rough night and ended up blowing the fusible link that comes off the solenoid Went back the next morning and fixed that, and when jeep fired up i noticed my fuel lines were cracked coming off the filter (stock 1 inlet, 2 outlet) Scan of provided installation instructions Is the body off the frame on either one of those
Dedicated to complete builds, rebuilds and restoration threads from start to end. Well you know on a stock cj how the oil from the rear port/hole in the valve cover gets sucked up into the air cleaner & the filter gets full of oil after a. Hi all, i have everything hooked up and running great after a long, almost 5 year hiatus I need some advice on what to do with my fuel vent My jeep is running the howell tbi an has zero emissions stuff hooked up to it The valve cover has a plug in the rear and the front one has a vent.
In front of walton lake (no relation as far as i know bw!) on a propane run Absolutely beautiful october weather here in the hudson valley.
OPEN
